Jiangsu Sveck New Materials Co., Ltd

Product center

Photovoltaic packaging materials
- Anti PID PID EVA film
- PO film
- White EVA film
- Reflective film
- EPE insulation strip
Aluminum plastic film for lithium battery
- Digital special aluminum plastic film
- Aluminum-plastic film for power
POLYPROPYLENE MATERIALS FOR MELTBLOWN

Location： Home > Products> Anti PID PID EVA film

Anti PID PID EVA film

SV-15296P&SV-15297P
Anti PID PID EVA film

? Can reduce the risk of component PID
? Good adhesion to TPE, PYE, KPE, TPT and other backplanes after aging
? Excellent weather resistance (including high temperature, high humidity, ultraviolet, etc.)
? Low shrinkage to ensure component stability during lamination
? Fast curing, improve component lamination production efficiency
? High light transmission to ensure the maximum output power of the module

Message？

sveck@sveck.com.cn

Need Help？

0519-82691636

Product Details Other Introductions

Technical Parameters

model	SV-15296P/SV-15297P
length	Customized according to customer requirements, between 150 meters and 400 meters
Width / thickness	Customized according to customer requirements
performance	project	standard test	unit	SV-15296P	SV-15297P
Physical properties	Thickness tolerance	GB/T 6672-2001	mm	+/-0.05
	Width tolerance	GB/T 6672-2001	mm	+5/-3
	density	ASTM D792	g/cm3	0.96
	Tensile strength (after curing)	GB/T 13022-91	Mpa	≥16	≥16
	Elongation at break (after curing)	GB/T 13022-91	%	550	550
	Peel strength between film and glass	ASTM D903	N/cm	＞60
	Peel strength between adhesive film and back sheet	ASTM D903	N/cm	＞40
Thermal performance	Shrinkage	ASTM 1204	MD%/TD%	＜4/＜2
Degree of cross-linking		ASTM D2765	%	>75	>75
Electrical performance	Volume resistivity	GB 1410-89	Ω.cm	＞1.0×10¹⁵
Optical performance	Light transmittance (after curing) （280-380nm）	GB/T2410-2008	%	≥80	≤20
Optical performance	Light transmittance (after curing) (380nm～1100nm)		%	≥91	≥91
Weatherability	UV aging yellowing index (60kWh/m2 )		ΔYI	<2
Weatherability	Damp heat aging （DH1000h）		ΔYI	<4

Lamination process

Type	Lamination temperature(℃)	Vacuum time (min）	Lamination time（min）
SV-15296P/SV-15297P	142-148	5-6	10-12

Note: Adjust the lamination process according to the customer's lamination equipment and the requirements of the crosslinking degree.

Other >>

Packing
▲ The inner diameter of the paper tube is 76mm, each roll is 150m / 200m / 400m, each roll is sealed with PE film, and 9 rolls / 6 rolls / 2 rolls are placed in a carton.
Store
Must be stored in a dry and cool constant temperature room
Temperature 0 ~ 30 ℃, humidity ≤60%;
The storage period of this product is 6 months from the production date
application
1. Make sure to store and use EVA film in a constant temperature and humidity room.
2. In order to avoid abnormal lamination of components due to static electricity, it is recommended to remove static electricity throughout the module.
3. The EVA film cut into sheets should be kept sealed to avoid pollution and moisture, and related facilities should be set up to avoid mosquito pollution.
4. It is recommended not to use each roll near the paper tube and the outermost circle.