1. <span id="0qtaa"></span>
        <dd id="0qtaa"><track id="0qtaa"></track></dd>
        
        

        <button id="0qtaa"></button>

        CN
         
         
        EPE insulation strip
        EPE insulation strip
        ? High adhesion to EVA film
        ? Excellent lamination characteristics
        ? Laminated without wrinkles
        ? UV resistance
        ? Breakdown resistance
        Message?

        sveck@sveck.com.cn

        Need Help?

        0519-82691636

         
        Product Details Other Introductions

        Sveck EPE is made of PET coated polyolefin resin, and its structure is: E layer / PET / E layer. The film can isolate the bus bars in the module, play an insulation role, and prevent short circuit of the bus bars of the module during use.


        Performance parameter         

        thickness

        Total thickness

        unit

        EPE300

        EPE325

        0.300

        0.325

        PET

        mm

        0.100

        0.125

        density

        ASTM D792

        g/cm3

        1.10

        1.10

        Tensile Strength

        ASTM D1000

        Mpa

        MD

        100

        MD

        100

        TD

        100

        TD

        100

        Elongation

        ASTM D1000

        %

        MD

        110

        MD

        110

        TD

        103

        TD

        105

        Peel strength (180°)

        TO PET

        N/cm

        Tear bond

        Tear bond

        After lamination

        TO EVA

        N/cm

        >100

        >130

        Shrinkage

        MD

        %

        MD

        <2.0

        MD

        <2.0

        TD

        %

        TD

        <1.0

        TD

        <1.5

        Water vapor transmission rate

        ASTM F1249                23°C, 90% RH

        g/m 2day

        3

        3

        Breakdown voltage

        ASTM D149

        kV

        >16

        >16

        Partial Discharge

        IEC 60664-1

        VDC

        1000

        1200

        Yellow

        Bare film

        30kwh/m2

        ΔY

        0.16

        0.18

        60kwh/m2

        After lamination

        30kwh/m2

        ΔY

        0.10

        0.12

        60kwh/m2

        1.34

        1.42

        Note: EPE022 needs to add a high cut-off EVA strip





        Isolation membrane structure composition

        Figure 1 SVK-GL01 

        isolation film structure diagram
        Layer E: It is composed of composite polyolefin resin. The imported rubber particles are used together with anti-ultraviolet and anti-aging additives to make it have excellent weather resistance.
        PET layer: The use of photovoltaic film material, through UL certification, to ensure excellent mechanical and electrical properties.
         Storage conditions
        ? Must be stored in a dry and cool constant temperature room;
        ? Temperature 0 ~ 30 ℃, humidity ≤60%;
        ? This product's storage quality guarantee period is 6 months from the production date. The EPE film has been opened. Please avoid contamination and moisture. It should be used within 6 hours.

        曰韩aⅴ人妻丝袜中文字幕
        1. <span id="0qtaa"></span>
            <dd id="0qtaa"><track id="0qtaa"></track></dd>
            
            

            <button id="0qtaa"></button>